Rectangular steel tube comes in different sizes, specifications and wall thicknesses. Its uniformity makes it predictable to use and visually appealing. It has a high weight-to-strength ratio.
It’s easy to bend, and because square steel tubing is inexpensive, it’s cost-effective- even for large projects.
We are manufacturing and exporting Rectangular Hollow Sections, Rectangular Hollow Steel Sections and Rectangular Hollow Section Tubes as per customer's requirement with anti rust oil coating from inside & outside of the tubes to ensure safe delivery to end customers.
Specialising in Steel, Cut to Length, Round, Square, Hollow, Rectangular, Rectangular Hollow Sections, RHS
A wide range of dimensions, when combined with the appropriate steel grade, ensure that the functionality and cost-efficiency of your structure can be optimised.
Steel Grade: Q195, Q215, Q235, Q345, S235JR, S275JR, SS4007-
Data | Elements（%） | ||||
Materal Grade | C | Mn | S | P | Si |
Q195 | 0.06-0.12 | 0.25-0.50 | <0.05 | <0.045 | <0.30 |
Q215 | 0.09-0.15 | 0.25-0.55 | <0.05 | <0.045 | <0.30 |
Q235 | 0.12-0.20 | 0.30-0.70 | <0.045 | <0.045 | <0.30 |
Q345 | <0.20 | 1.0-1.6 | <0.04 | <0.04 | <0.55 |
Materal Grade | Yield point (Mpa) | Tensile Strength (Mpa) | Elongation(%) |
Q195 | >195 | 315-430 | 32-33 |
Q215 | >215 | 335-450 | 26-31 |
Q235 | >235 | 375-500 | 24-26 |
Q345 | >345 | 470-630 | 21-22 |
They are measured by their outside dimensions and their wall thickness.
Length | +/- 50 MM |
Wall Thickness | +/- 12.5% |
Weight | +/- 8% |
A: with, T: wall thickness, SHS:Square Hollow Section, RHS: Rectangular Hollow Section
Surface Finish: hot dipped galvanized, electro galvanized, black
Third party inspection: SGS, BV, Lloyds etc.
Note: Pre-galvanized square / rectangular hollow section with OD 19mm-70mm and thickness 1mm-2.3mm are also available.
Application:
Furniture industries & domestic applications, bus body, fencing etc. Sizes other than mentioned above can also be produced upon specific requirements.
Tel:
E-mai:
Skype:
