EVERBRIGHT

The NW Long Weld Neck Flanges are the best designed butt-welded flange of those currently available becuase of its inherent structural value. It is expensive because of the design.

NW Long Weld Neck Flanges

Long welding neck flange, lwn flanges are similar to a standard Welding Neck flanges, but the “Neck” is considerably longer than other flanges. LWN flange is often used as a nozzle for a barrel or column. In addition, there are the type LWN Heavy Barrel (HB) and the Equal LWN Barrel (E); they have a different shape and a thicker “Wall”.

The long weld neck flange should be butt welded with the pipes, it means the neck dimensions is same with the matching pipe, same diameter and wall thickness , commonly the long weld has a plain end, not a bevel end for welding . Except the neck, the LWN flange has a same dimensions with the welding neck flange. In addition, there are also the type LWN Heavy Barrel (HB) and the Equal LWN Barrel (E); they have a different shape and a thicker “Wall” which name is Nozzle .

Tube OD sizes: 3/8 to 2 inches

The NW Long Weld Neck Flange is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange.

The NW Long Weld Neck Flange is the best designed butt-welded flange of those currently available becuase of its inherent structural value. It is expensive because of the design.

Materials:
Carbon steel: A105,SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8
Stainless Steel: F304 F304L F316 F316L 316Ti, Copper etc.

Vacuum range
Elastomer seal: >=1 x 10^-8 Torr - High vacuum
EVAC metal seal: >=1 x 10^-11 Torr - UHV

Temperature range
Viton: -20°C to 200°C
Silicone: -50°C to 230°C
Buna: -30°C to 110°C
EVAC metal seal: -270°C to 150°C

Packing: No Fumigate or Fumigate Plywood/Wood Pallet or Case

Surface Treatment: Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,Hot dipped Galvanized.