EVERBRIGHT

We are manufacturer of Lateral tee and supply high quality Lateral tee in both large and small quantities worldwide & offer you the best prices in the market.

What is the difference between lateral tee and True WYE

We are manufacturer of Lateral Wye, Lateral Tee, true WYE and supply high quality Lateral Wye, Lateral Tee, true WYE in both large and small quantities worldwide & offer you the best prices in the market.
We should analyze this from their shapes:the lateral tee divide two branch pipes:one is same direction with the inflow pipe,the other have a 45 degree angle to inflow pipe. The WYE have two branch pipes at a 45 degree angle between them,and the two branch pipes are symmetrical to the centerline of the inflow pipe which means the two outflow direction are both at 22.5 degree to the inflow direction.
Comparing the two lateral pipe fittings,when the inflow pipe direction is horizontal to the ground,we can choose the lateral tee for better support from ground,and when the inflow pipe direction is vertical,then we’d better use the WYE fitting,it will bring a symmetrical interaction force to the piping system. Such designing will make sure the pipe in a stable support when running.

Lateral size:

The latrolet (Lateral Outlet) is one kind of tee fittings,which has a 45 degree branch from a pipeline.

Materials

Carbon steel: ASTM/ASME A234 WPB-WPC
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911 
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N 
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti 
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6 
High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70

Size range: 1/2 to 72 inches
Pressure: SCH5 to SCH160

Features of Pipe Tee:

• There are three female openings in a T shaped pipe tee.

• There are straight pipe tees which have the same size openings.

• Reducing pipe tees have one opening of different size and two openings of the same size.

• There are sanitary pipe tees which are used in waste lines. These kind of pipe tees have a curved branch which is designed for a clean out plug. They are used to prevent obstruction of waste.

• A cross pipe tee has four equal sized female openings.

• A wing pipe tee has lugs to fasten the fitting to a wall or stud.

• A compression pipe tee uses compression fittings on two or more ends.

• A test pipe tee has a threaded opening. This opening is used in conjunction with a threaded plug for a clean-out opening on a drain pipe.

Applications of pipe tee:

Pipe Tees are widely used in various commercial and industrial applications. Industrial applications include:

• Chemical processing

• Petroleum

• Pulp/paper

• Refining

• Textile

• Waste treatment, Marine

• Utilities/power generation

• Industrial equipment

• Automotive

• Gas compression and distribution industries

• Pipe Tees are also recommended for industrial plant fluid power systems.

We are manufacturer of Reducing tee and supply high quality Reducing tee in both large and small quantities worldwide & offer you the best prices in the market.

We have a team of experienced professionals with years of experience in manufacturing.