The equal cross is one kind of the pipe cross, just like a equal tee, the equal cross means all the 4 ends of the cross are in same diameter.
We have a team of experienced professionals with years of experience in manufacturing.
Nominal Pipe Size (NPS) | DN | Outside Diameter at Bevel | Center- to-End | |
Run.C | Outlet. M[Notes(1) and (2)] | |||
1/2 | 15 | 21.3 | 25 | 25 |
3/4 | 20 | 26.7 | 29 | 29 |
1 | 25 | 33.4 | 38 | 38 |
1-1/4 | 32 | 42.2 | 48 | 48 |
1-1/2 | 40 | 48.3 | 57 | 57 |
2 | 50 | 60.3 | 64 | 64 |
2-1/2 | 65 | 73.0 | 76 | 76 |
3 | 80 | 88.9 | 86 | 86 |
3-1/2 | 90 | 101.6 | 95 | 95 |
4 | 100 | 114.3 | 105 | 105 |
5 | 125 | 141.3 | 124 | 124 |
6 | 150 | 168.3 | 143 | 143 |
8 | 200 | 219.1 | 178 | 178 |
10 | 250 | 273.0 | 216 | 216 |
12 | 300 | 323.8 | 254 | 254 |
14 | 350 | 355.6 | 279 | 279 |
16 | 400 | 406.4 | 305 | 305 |
18 | 450 | 457 | 343 | 343 |
20 | 500 | 508 | 381 | 381 |
22 | 550 | 559 | 419 | 419 |
24 | 600 | 610 | 432 | 432 |
26 | 650 | 660 | 495 | 495 |
28 | 700 | 711 | 521 | 521 |
30 | 750 | 762 | 559 | 559 |
32 | 800 | 813 | 597 | 597 |
34 | 850 | 864 | 635 | 635 |
36 | 900 | 914 | 673 | 673 |
38 | 950 | 965 | 711 | 711 |
40 | 1000 | 1016 | 749 | 749 |
42 | 1050 | 1067 | 762 | 711 |
44 | 1100 | 1118 | 813 | 762 |
46 | 1150 | 1168 | 851 | 800 |
48 | 1200 | 1219 | 889 | 838 |
GENERAL NOTES: All dimensions are in millimeters.
(a). Outlet dimension M for NPS 26(DN 650) and large is recommended but not required.
(b). Dimensions applicable to crosses NPS 24(DN 600) and smaller.
A pipe tee is a type of fitting that has a T shape and is used to join two or more plumbing pipes.
Equre tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
Reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run.
Barred tee is used in pipelines that are pigged.
Lateral tee has a 45 degree branch from a pipeline.
Pipe cross is a fitting that used in the place where four pipes meet with the same diameter include:
Reducing cross used for connecting four pipes, the main pipes with the same size, but the dimensions of the branch diameter is smaller than the main pipes.
Equal cross in the place where four pipes meet with the same diameter.
Forged Tee Fittings are pipe fittings that be formed mainly by forging.
Carbon steel: ASTM/ASME A234 WPB-WPC
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low temperature steel: ASTM/ASME A402 WPL 3-WPL 6
High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70
Size range: 1/2 to 72 inches
Pressure: SCH5 to SCH160
ASME B16.9, Factory-Made Wrought Steel Buttwelding Fittings
ASME B16.28, Buttwelding Short Radius Elbows and Returns
ANSI/ASME B16.25, Buttwelding Ends
MSS SP-97, Socket Welding, Threaded, and Buttwelding Ends
Tolerance For butt Welding Fittings
Industrial Processes : Bending, squeezing, pressing, forging, machining and more
There are three female openings in a T shaped pipe tee.
There are straight pipe tees which have the same size openings.
Reducing pipe tees have one opening of different size and two openings of the same size.
There are sanitary pipe tees which are used in waste lines. These kind of pipe tees have a curved branch which is designed for a clean out plug. They are used to prevent obstruction of waste.
A cross pipe tee has four equal sized female openings.
A wing pipe tee has lugs to fasten the fitting to a wall or stud.
A compression pipe tee uses compression fittings on two or more ends.
A test pipe tee has a threaded opening. This opening is used in conjunction with a threaded plug for a clean-out opening on a drain pipe.
Saddle previously is the ventilation ducts 'crotch tee', its shaped like pants, there Equal and unequal diameter, the formal name is "tube tapered pants tee."
Saddle previously DIN2618 is to replace the existing tee fitting, the use of flexibility, praised by domestic and foreign markets.
Stainless steel Tee is T-shaped pipe fittings with two outlets, one at 90° to the connection to the main line by stainless.
Tees straight and reducing- The primary purpose of a Tee is to make a 90° branch from the main run of pipe.
Wear-resistant Alloy Composite Pipe Tee
Ceramic lined composite Y-type Tee
Ceramic lined composite pipe tee
Aluminum corundum lined lateral wye
Bi-metal clad lateral wye
Pipe Tees are widely used in various commercial and industrial applications. Industrial applications include:
Chemical processing
Petroleum
Pulp/paper
Refining
Textile
Waste treatment, Marine
Utilities/power generation
Industrial equipment
Automotive
Gas compression and distribution industries
Pipe Tees are also recommended for industrial plant fluid power systems.
We are manufacturer of Reducing tee and supply high quality Reducing tee in both large and small quantities worldwide & offer you the best prices in the market.
We have a team of experienced professionals with years of experience in manufacturing.
Tel:
E-mai:
Skype: