EVERBRIGHT

We manufacture a wide range of vessel heads to works standards, both for construction purposes and as dished vessel heads in the form of torispherical heads, elliptical heads and caps for pressure applications.

Applications are very varied – ranging from candleholders to pipe end-pieces or pressure vessels in equipment construction. And if a central hole is needed for connections, this can also be provided.

Lifting and handling of a Pressure vessel

Vessels used to store liquids at low pressure are normally fitted with flat end sections. This is the cheapest way of enclosing the end of a vessel. For storage of fluids at higher pressures, the ends are normally domed to reduce mechanical stresses.

A number of different domed head designs are used.

DISDHED PLATES

For pressures over 10 bar, ellipsoidal heads are often used. In cross-section, the head resembles an ellipse, its radius varying continuously. This results in a smooth transition between the dome and the cylindrical part of the vessel. Ellipsodial heads are deeper than comparable torispherical heads.

HEADS

TORISPHERICAL HEADS

CAPS

Here you can see our range of vessel heads:(hover for more information)

Key Specifications/Special Features:

Pipe Cap are used for connecting pipes of different diameters and find wide applications in various chemicals, construction industries, paper, cement & ship builders.

Size range:

Pipe caps are widely well-known for the utmost output and outstanding results that it gives.

· Out diameter: 1/2"-60" DN15-DN1500 

· Wall Thickness: sch10-80s

· Pressure: SCH5 to SCH160v

· Max. wall thickness: 200mm