410 pipe is used where abrasion and wear resistance is needed, combined with fair resistance to general corrosion and oxidation.
· ASTM: A268, A815, A182
C | Cr | Mn | Ni | P | S | Si |
Max | Max | Max | Max | Max | ||
0.15% | 11.5% - 13.5% | 1.0% | 0.5% | 0.04% | 0.03% | 0.75% |
· Martensitic stainless steel with high mechanical properties.
· Ferromagnetic in the annealed or hardened condition.
· Contains minimum amount of chromium to impart stainless steel properties.
· Resists oxidation and scaling up to 1200°F.
· Resists abrasion and wear better than most 300 series stainless steels.
· Good sulphide stress corrosion cracking resistance.
· Hardness is one of Type 410's best features.
Material | Tempering Temp °C (°F) | 0.2 % Yield Strength (Mpa) | Ultimate Tensile Strength (Mpa) | % Elongation in 2" | % Reduction of Area | Charpy V Notch Impact Strength (J) | Hardness Brinell |
Alloy 410 Bar | 260 (500) | 1089 | 1331 | 17 | 62 | 76 | 401 |
Alloy 410 Bar | 317 (700) | 1069 | 1296 | 17 | 60 | 66 | 401 |
Alloy 410 Bar | 482 (900) | 1014 | 1303 | 18 | 58 | 38 | 401 |
Alloy 410 Bar | 538 (1000) | 917 | 965 | 19 | 62 | 33 | 285 |
Alloy 410 Bar | 593 (1100) | 724 | 827 | 20 | 63 | 52 | 248 |
Alloy 410 Bar | 649 (1200) | 634 | 731 | 21 | 65 | 119 | 223 |
· Pipelines transporting fluids mixed with solids like coal, sand or gravel.
Tensile Strength (KSI): 60
Yield Strength (KSI): 30
Tel:
E-mai:
Skype:
